IAP11F06：Free Shipping IAP11F06

IAP11F06：Free Shipping IAP11F06
Features
* Enhanced 80C51 Central Processing Unit ,1T per machine cycle, faster 6~7 times than the rate of a standard 8051.
* Operating voltage range: 5.5V~4.1V/3.7V or 2.1V/2.4V~ 3.6V (STC11L/10Lxx series)
* Operating frequency range: 0- 35MHz, is equivalent to standard 8051:0~420MHZ
* STC11F/Lxx series Flash program memory : 1/2/3/4/5/6/8/16/20/32/40/48/52/56/62K
* STC10F/Lxx series Flash program memory : 2/4/6/8/10/12/14K
* On-chip 1280/512/256 byte RAM
* Be capable of addressing up to 64K byte of external RAM
* Dual Data Pointer (DPTR) to speed up data movement (except STC11F01 series)
* Code protection for flash memory access
* two 16-bit timer/counter, as the same as Timer0/Timer1 of standard 8051
* 6 vector-address, 2 level priority interrupt capability
* One enhanced UART with hardware address-recognition, frame-error detection function, and with self baudrate generator.
* One 15 bits Watch-Dog-Timer with 8-bit pre-scaler (one-time-enabled)
* Simple internal RC oscillator and high-precision external crystal clock.
* Three power management modes: idle mode, slow down mode and power-down mode
* Power down mode can be woken-up by INT0/P3.2 pin, INT1/P3.3 pin, T0/P3.4, T1/P3.5, RXD/P3.0 pin (or RXD/P1.6 pin)
* Maximum 40 programmable I/O ports are available
* Programable clock output Function. T0 output the clock on P3.4, T1 output the clock on P3.5, BRT output the clock on P1.0.
* Operating temperature: -40 ~ +85oC (industrial) / 0~75oC (commercial)
* Package type :LQFP-44,PDIP-40,PLCC-44,QFN-40,SOP20,DIP20, LSSOP20,DIP18,SOP16,DIP16,TSSOP14
Introduction
STC11F/10Fxx series are a single-chip microcontroller based on a high performance 1T architecture 80C51 CPU, which is produced by STC MCU Limited. With the enhanced kernel, STC11F/10Fxx series execute instructions in 1~6 clock cycles (about 6~7 times the rate of a standard 8051 device), and have a fully compatible instruction set with industrial-standard 80C51 series microcontroller . In-System-Programming (ISP) and In-Application-Programming (IAP) support the users to upgrade the program and data in system. ISP allows the user to download new code without removing the microcontroller from the actual end product; IAP means that the device can write non-valatile data in Flash memory while the application program is running. The STC11F/10Fxx series retain all features of the standard 80C51. In addition, the STC11F/10Fxx series have a extra I/O port (P4 ), a 6-sources, 2-priority-level interrupt structure, on-chip crystal oscillator,and a one-time enabled Watchdog Timer.